How To Flash Stock/Custom Rom Using Smart Phone Flash Tool


Hi...Guys Today I'll Show You How You Can Flash Stock/Custom Rom Using Smart Phone Flash Tool(SP Flash Tool)...!

Requirements 

Your device must have at least 40-50 percent battery to preform flashing process...! 

Instructions

Step-1 Download and install android USB drivers in your PC...Click Here To Download

Step-2 Power Off your Android Device and remove the Battery,SD Card and Sim/RIM Card (if it is removable)

Step-3 Download the Custom Rom or Stock Rom that you want to Flash on your Android Smartphone and extract it to your Computer. Click Here To Download 

Step-4 Download and Extract Smart Phone Flash Tool (SP Flash Tool) on Your Computer. After Extracting you will be able to see the following those files.


Step-5 Now Open Flash_tool.exe File.



Step-6 Once Smart Phone Flash Tool is launched, you will be able to see Scatter-loading Button .



Step-7 In the Download Tab, Click on the scatter-loading button.



Step-8 Now, Find the Scatter File  (Note: you will find the scatter file in the Stock rom folder).



Step-9 Now, Click on the Download Button to start the Flashing Process.



Step-10 After that press volume down or volume up key and connect your device using a USB data cable from the computer. (Without battery - if it is removable. Some devices require battery to start flash process) Now flash tools start flash process and wait while flashing.

Step-11 Once the flashing is done, a green ring will appear on the screen.


Step-12 Close the Flash Tool and disconnect your Device from the computer.Now Power On your device . This may take Few Minute to Power On the Device.

Enjoy!

No comments

Powered by Blogger.