How to use Xiaomi MI Flash Tool


Hi...Guys Today I'll Show You How You Can Flash Stock/Custom Rom Using Mi-Flash Tool...!


Requirements

Xiaomi Mi Flash Tool will only work on the Xiaomi Devices which is running on Qualcomm Chipset. It will not support the Xiaomi Devices which are not running on Qualcomm Chipset....!


Instructions

Step 1Download and extract the Xiaomi Mi Flash Tool on your computer. After Extract Those File You Will See Like This..
Step 2: Now, Open the Setup File to install Xiaomi Mi Flash Tool on your computer.
Step 3: Download and extract the Xiaomi Stock Firmware (fastboot files) on your computer. After You Extract Those Files You Will See Something like this:
Step 4: Now,install the Xiaomi USB Driver on your PC.
Step 5: Then Power Off your Xiaomi Device.

Step 6: Now, Go to in Your Download Mode/fastboot mode. To boot into the download mode: Press and Hold Power + Volume Down button for 6-8 seconds.

Step 7: Once you have booted into the Download Mode, you will be able to see the following screen on your device:
Step 8: Now, Connect your Device into your PC using the USB cable.
Step 9: Then, Open Mi Flash Tool.
Step 10: Once Mi Flash Tool is Open You Will See Like This:

Step 11:Click the Select Button & choose the Firmware Folder.
Step 12: Then Click on Flash Button to start the Rom Flashing Process,(Make Sure Your Device Must Have More Than 60% Of Battary).
Step 13: When The flashing process will complete, It Will Show the Success Message in Mi Flash Tool.
_________________________________________________________________________________
Although the steps to Use Mi-Flash Tool is well describe Above but, if you face any trouble in any part of the process, then comment Us On Comment Section...

No comments

Powered by Blogger.